Step 1: Launch the Home Scalar Software

1. Open the Application:

- Start the Home Scalar software on your computer.

2. Connect Your Device:

- Use the provided USB cable to connect your Home Scalar Device to your computer.

3. Verify Connection:

- Ensure the software recognizes your device. Look for a connection indicator or status message within the interface.

Step 2: Access the Manual Frequency Input Section

1. Navigate to the 'Frequency' Tab:

- In the main menu of the software, click on the 'Frequency' or 'Manual Input' tab.

2. Select 'Add New Frequency':

- Choose the option labeled 'Add New Frequency' or 'Manual Frequency Entry' to open the frequency input fields.

Step 3: Input Your Desired Frequencies

1. Prepare Your Frequency List:

- Frequencies to Input (15 seconds each):

- 0.04 Hz

- 0.18 Hz

- 0.5 Hz

- 0.9 Hz

- 1.0 Hz

- 1.5 Hz

- 2.5 Hz

- 6.8 Hz

- 7.5 Hz

- 7.83 Hz

- 10 Hz

- 12.5 Hz

- 14 Hz

- 20 Hz

- 85 Hz

- 432 Hz

- 528 Hz

- 1052 Hz

- 1870 Hz

- 2489 Hz

- 126.22 Hz

2. Enter Each Frequency:

- In the 'Frequency' field, type the first frequency (e.g., 0.04 Hz).

- In the 'Duration' field, enter 15 seconds.

- Click 'Add' or 'Save' to include it in your session.

- Repeat this process for each frequency in your list.

Step 4: Organize Your Frequencies for Sweeping

1. Create a Custom Sweep Program:

- After entering all frequencies, create a new program (e.g., "Hurricane Support Sweep") to organize them into a sweeping sequence.

2. Arrange Frequencies:

- Ensure that each frequency is listed in the order you prefer them to run.

- This sequence will cycle through each frequency for the set duration.

Step 5: Set the Program to Repeat Continuously

1. Access 'Settings':

- Navigate to the 'Settings' tab within the software.

2. Enable Repeat Mode:

- Look for an option labeled 'Repeat Program' or 'Loop'.

- Set it to 'Continuous' or 'Infinite' to ensure the frequencies keep cycling without interruption.

Step 6: Start the Frequency Transmission

1. Select Your Custom Sweep Program:

- Go back to the 'Programs' tab and select "Hurricane Support Sweep" (or the name you assigned).

2. Begin Transmission:

- Click 'Start' or 'Run' to initiate the frequency sweep.

3. Monitor the Session:

- Ensure the program is running smoothly by observing the software’s interface for progress indicators or timers.

Step 7: Integrate Bio-Signatures (Optional but Recommended)

1. Gather Bio-Signature Photos:

- Print clear photographs of your home, vehicle, neighborhood, and a picture of Hurricane Milton.

2. Place Photos Near the Device:

- Arrange these photos on or near the scalar plate of your Home Scalar Device. These act as bio-signatures, enhancing the effectiveness of the frequencies by providing energetic imprints.

Step 8: Maintain Optimal Operation

1. Prevent Sleep Mode:

- Adjust your computer’s power settings to prevent it from sleeping or shutting down during the session.

- For Windows:

- Go to 'Control Panel' > 'Power Options' > 'Change Plan Settings'.

- Set 'Put the computer to sleep' to 'Never'.

- For Mac:

- Go to 'System Preferences' > 'Energy Saver'.

- Set 'Turn display off after' to 'Never' and check 'Prevent computer from sleeping automatically when the display is off'.

2. Ensure Continuous Power:

- Keep your Home Scalar Device and computer plugged in to avoid power interruptions.

📢 Final Call to Action:

Harness the power of your Home Scalar Device today! Customize your frequency programs, integrate bio-signature photos, and take proactive steps to enhance your well-being and protect your surroundings. Don’t wait—transform your energy and environment now!

Place Hurricane Milton on the scalar or near it

Home Scalar with 60k Program frequencies + Laptop

Investing in UberEATS Before UberEATS: Guatemala’s Hidden Gem is Your Next Big Move

Atlanta FREE FOOD FOREST

THE LiST Scalar Imprinting Frequencies to choose from

Why Saliva is Bioelectric

THE LiST Scalar Imprinting Frequencies to choose from

See all posts from theblackairbender